| ID |
Published |
Title |
| G-7 |
05/06/08 |
Compressed Air for Human Respiration |
| C-16 |
05/02/08 |
CGA Registration Program for Cylinder Owner Symbols |
| C-16.1 |
05/02/08 |
CGA Cylinder Owner's Registration Symbols and Company Names |
| V-12 |
05/02/08 |
Leak Detection Fluids Use with Gas Cylinder Packages (EIGA Doc 78/08) |
| E-17 |
04/23/08 |
Hose Line Quick-Connect Couplings for Welding, Cutting, and Allied Processes |
| ISO-4706-1 |
04/15/08 |
Gas cylinders—Refillable welded steel cylinders—Part 1: Test pressure 60 bar and below |
| TB-25 |
04/15/08 |
Design Considerations for Tube Trailers |
| P-2.7 |
04/09/08 |
Guide for the Safe Storage, Handling, and Use of Small Portable Liquid Oxygen Systems in Health Care Facilities |
| SB-6 |
04/04/08 |
Nitrous Oxide Security and Control |
| SB-9 |
04/04/08 |
Recommended Practice for the Outfitting and Operation of Vehicles Used in the Transportation and Transfilling of Liquid Oxygen Used for Respiration |
| TB-30 |
04/04/08 |
Embrittlement Due to Overheating of DOT-4L and TC-4LM Liquid Cylinders |
| H-5 |
03/12/08 |
Installation Standards for Bulk Hydrogen Supply Systems |
| P-9 |
03/10/08 |
The Inert Gases: Argon, Nitrogen, and Helium |
| ISO-14687-TC2 |
03/01/08 |
Hydrogen fuel, Product specification-Technical Corrigendum 2 |
| ISO-TS-14687-2 |
03/01/08 |
Hydrogen fuel—Product specification—Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| TB-9 |
02/19/08 |
Guidelines for the Proper Handling and Use of the CGA 630/710 Series Ultra High Integrity Service Connections |
| ISO-5145-AMD2 |
02/15/08 |
Cylinder valve outlets for gases and gas mixtures—Selection and dimensioning AMENDMENT 2 |
| G-6.11 |
02/13/08 |
Concentration of Impurities in Bulk Carbon Dioxide Storage Tanks at Customer Sites |
| M-11 |
01/31/08 |
Compliance with the Quality Systems Approach to Pharmaceutical CGMPs Guidance |
| M-12 |
01/28/08 |
Investigating Out-of-Specification Test Results for Medical Gas Manufacturing |
| P-23 |
01/25/08 |
Standard for Categorizing Gas Mixtures Containing Flammable and Nonflammable Components |
| ISO-21011 |
01/02/08 |
Cryogenic vessels—Valves for cryogenic service |
| ISO-13769 |
12/15/07 |
Gas Cylinders-Stamp Marking |
| G-8.1 |
12/10/07 |
Standard for Nitrous Oxide Systems at Customer Sites |
| G-6.8 |
12/07/07 |
Transfilling and Safe Handling of Small Carbon Dioxide Cylinders |
| ISO-15996-AMD1 |
12/01/07 |
Gas cylinders—Residual pressure valves—General requirements and type testing, AMENDMENT 1 |
| PS-30 |
11/27/07 |
CGA Position Statement on the Use of Railroad Tank Cars for Stationary Liquid Carbon Dioxide Storage |
| S-8 |
11/19/07 |
Recommendations to Minimize Hazards of CG-7 Pressure Relief Valves and Ancillary Devices for Liquefied Petroleum Gas Cylinders |
| C-6.4 |
11/14/07 |
Methods for External Visual Inspection of Natural Gas Vehicle (NGV) and Hydrogen Vehicle (HV) Fuel Containers and Their Installations |
| E-8 |
11/13/07 |
Gas Flowmeters |
| SB-2 |
11/09/07 |
Oxygen-Deficient Atmospheres |
| G-5.8 |
11/08/07 |
High Pressure Hydrogen Piping Systems at Consumer Locations |
| SB-23 |
11/08/07 |
Liquid Oxygen Withdrawal from Health Care Facilities' Bulk Systems |
| PS-31 |
11/06/07 |
CGA Position Statement on Cleanliness for Proton Exchange Membranes Hydrogen Piping/Components |
| G-1.6 |
11/01/07 |
Recommended Practices for Mobile Acetylene Trailer Systems |
| PS-29 |
10/31/07 |
CGA Position Statement on Marking of DOT Monolithic Compressed Gas Cylinders |
| SB-12 |
10/15/07 |
Use of Regulator Pressure Gauges |
| V-6.1 |
10/15/07 |
Standard Carbon Dioxide Transfer Connections |
| G-6.5 |
10/01/07 |
Standard for Small, Stationary, Insulated Carbon Dioxide Supply Systems |
| G-4.3 |
09/26/07 |
Commodity Specification for Oxygen |
| P-40 |
09/07/07 |
Calculation Method for the Analysis and Prevention of Overpressure During Refilling of Cryogenic Storage Tanks |
| P-7 |
09/07/07 |
Standard for Requalification of Cargo Tank Hose Used in the Transfer of Carbon Dioxide Refrigerated Liquid |
| ISO-22435 |
09/01/07 |
Gas cylinders—Cylinder valves with integrated pressure regulators— Specification and type testing |
| P-30 |
08/31/07 |
Portable Cryogenic Liquid Containers--Use, Care, and Disposal |
| SB-22 |
08/31/07 |
Aluminum Cylinders-Guidelines for Heat Exposure Indicating Systems |
| G-6.7 |
08/22/07 |
Safe Handling of Liquid Carbon Dioxide Containers That Have Lost Pressure |
| G-8.2 |
08/21/07 |
Commodity Specification for Nitrous Oxide |
| ISO-11625 |
08/15/07 |
Gas Cylinders-Safe Handling |
| S-1.1 |
08/10/07 |
Pressure Relief Device Standards-Part 1-Cylinders for Compressed Gases |
| P-2.5 |
08/09/07 |
Transfilling of High Pressure Gaseous Oxygen Used for Respiration |
| ISO-20421-1-TC1 |
08/01/07 |
Cryogenic vessels-Large transportable vacuum-insulated vessels-Part 1: Design, fabrication, inspection and testing-Technical Corrigendum 1 |
| M-3 |
07/20/07 |
Guide for the Manufacturer of Bulk Medical Gases |
| SA-19 |
07/16/07 |
Safety Alert, Filling of Medical Gases by Emergency Medical Services |
| PS-13 |
07/10/07 |
CGA Position Statement on Definition of a Threshold Oxygen-Mixture Concentration Requiring Special Cleaning of Equipment |
| P-22 |
07/03/07 |
The Responsible Management and Disposition of Compressed Gases and their Cylinders |
| ISO-10286 |
07/01/07 |
Gas Cylinders-Terminology |
| C-12 |
06/27/07 |
Qualification Procedure for Acetylene Cylinder Design |
| TB-27 |
06/26/07 |
Recommendations for CG-7 Pressure Relief Valves used in Propylene Service |
| ISO-21013-2 |
06/15/07 |
Cryogenic vessels-Pressure-relief accessories for cryogenic service- Part 2: Non-reclosable pressure-relief devices |
| M-7 |
06/11/07 |
Guideline for Qualifying Suppliers used by Medical Gas Manufacturers and Distributors |
| P-25 |
05/22/07 |
Guide for Flat-Bottomed LOX/LIN/LAR Storage Tank Systems |
| SB-26 |
05/22/07 |
Cylinder Connections on Portable Liquid Cryogenic Cylinders |